SAE AMS3110K Primer, Zinc Chromate (Stabilized: Jul 2013) standard by SAE International, 07/22/2013
SAE AMS3140B Coating, Urethane, Aliphatic Isocyanate Polytetrafluoroethylene Filled (Stabilized: Jul 2013) standard by SAE International, 07/22/2013
SAE AMS3799/2C Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10 231) Breaking Strength standard by SAE International, 07/19/2013
SAE AMS3799/3C Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17 793) Breaking Strength standard by SAE International, 07/19/2013
SAE AMS3799/4C Webbing, Tubular, Low Modulus Aramid 3-3/16 (81) Wide, 2250 (10 008) Breaking Strength standard by SAE International, 07/19/2013
SAE ARP1842 Surface Preparation for Structural Adhesive Bonding Aluminum Alloy and Low Alloy Steel Parts standard by SAE International, 07/19/2013
SAE ARP1843A Surface Preparation for Structural Adhesive Bonding Titanium Alloy Parts standard by SAE International, 07/19/2013
SAE ARP1524A Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding standard by SAE International, 07/19/2013
SAE AMS3217/5C Test Slabs, Fluorosilicone (FVMQ) 55 - 65 standard by SAE International, 07/19/2013
SAE AS22759/51 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, LIGHTWEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT standard by SAE International, 07/18/2013
SAE AMS3346G Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer standard by SAE International, 07/19/2013
SAE AMS2440B Inspection of Ground, Chromium Plated Steel Parts standard by SAE International, 07/18/2013