SAE AMS4179C Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated standard by SAE International, 05/19/2010
SAE AMSQQA225/6A Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished standard by SAE International, 05/19/2010
SAE AMSQQA225/5 Aluminum Alloy, 2017, Bar, Rod, and Wire Rolled, Drawn, or Cold Finished standard by SAE International, 05/19/2010
SAE AMS2580 Shot Peening, Ultrasonically Activated standard by SAE International, 05/17/2010
SAE AMS2585 Shot Peening Media, Ultrasonically Activated standard by SAE International, 05/17/2010
SAE AMS3205M Synthetic Rubber Low-Temperature Resistant 45 - 55 standard by SAE International, 05/17/2010
SAE AMS3320H Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 - 80 standard by SAE International, 05/17/2010
SAE AMS3328B Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 - 45 standard by SAE International, 05/17/2010
SAE AMS3330B Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 - 55 standard by SAE International, 05/17/2010
SAE AMS3329B Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45 - 55 standard by SAE International, 05/17/2010
SAE AMS3331B Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 65 - 75 standard by SAE International, 05/17/2010
SAE AMS3657E Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, As Sintered standard by SAE International, 05/17/2010