SAE AS1036H FITTING, CROSS, STANDARD AND REDUCER, FLARED standard by SAE International, 03/29/2010
SAE AS1033F FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED standard by SAE International, 03/29/2010
SAE AS15720C FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION RESISTANT STEEL, TYPE VII standard by SAE International, 03/29/2010
SAE AS15721C FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, CORROSION RESISTANT STEEL, TYPE VIII standard by SAE International, 03/29/2010
SAE J 156 Fusible Links standard by SAE International, 03/24/2010
SAE AMS5786G Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe standard by SAE International, 04/19/2010
SAE AMS5762F Steel, Corrosion Resistant, Bars, Wire, and Forgings, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S, Free Machining, Solution Heat Treated standard by SAE International, 04/19/2010
SAE AMS5656E Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings, 9.0Mn - 20Cr - 6.5Ni - 0.27N, Solution Heat Treated standard by SAE International, 04/19/2010
SAE AMS5621F Steel, Corrosion Resistant, Bars, Wire, and Forgings, 13Cr (0.30 - 0.40C) (SAE 51420) Annealed standard by SAE International, 04/19/2010
SAE AMS4992A Castings, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically Pressed standard by SAE International, 04/19/2010
SAE AMS4991D Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional standard by SAE International, 04/19/2010
SAE AMS4985D Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified standard by SAE International, 04/19/2010