SAE AS18280E Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi standard by SAE International, 01/06/2010
SAE AS15002C FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, STRAIGHT THREADS, STEEL, TYPE II standard by SAE International, 01/06/2010
SAE AMS2482D Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated or Codeposited standard by SAE International, 01/05/2010
SAE AMS2430R Shot Peening, Automatic standard by SAE International, 01/05/2010
SAE AMS2825B Material Safety Data Sheets standard by SAE International, 01/05/2010
SAE AMS2530 Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less, Impingement Applied standard by SAE International, 01/05/2010
SAE AMS4224C Aluminum Alloy Castings, Sand, 4.0Cu - 2.1Ni - 2.0Mg - 0.30Cr - 0.30Mn - 0.13T - 0.13V (243.0), Stabilized standard by SAE International, 01/05/2010
SAE AMS5585G Alloy, Corrosion and Heat Resistant, Welded Tubing, 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.15N, Solution Heat Treated standard by SAE International, 01/05/2010
SAE AMS2630C Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick standard by SAE International, 01/05/2010
SAE AMS4871G Aluminum Bronze, Centrifugal and Chill Castings, 85Cu - 11Al - 3.6Fe, Solution Heat Treated and Tempered standard by SAE International, 01/05/2010
SAE AMS4313D Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved standard by SAE International, 01/05/2010
SAE GEIAHB0007A Logistics Product Data Handbook standard by SAE International, 01/01/2010