SAE AMS5940C Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable standard by SAE International, 07/15/2008
SAE AMS6385H Steel Sheet, Strip, and Plate, Low Alloy, Heat Resistant 0.65Si 1.25Cr 0.50Mo 0.25V (0.27-0.33C) standard by SAE International, 07/15/2008
SAE AMS2469H Hard Anodic Coating on Aluminum and Aluminum Alloys standard by SAE International, 07/15/2008
SAE AMS4244B Aluminum Alloy, Welding Wire, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti For Welding A206.0 Type Alloys standard by SAE International, 07/15/2008
SAE AMS4025L Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed standard by SAE International, 07/15/2008
SAE J 588 Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width standard by SAE International, 07/15/2008
SAE AIR5713 In-Service Reliability Data of Continuously Active Ballscrew and Geared Flight Control Actuation Systems standard by SAE International, 07/15/2008
SAE AS 5960A Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 mDF (204 mDC), Aircraft Hydraulic Systems standard by SAE International, 07/15/2008
SAE AIR1903 Aircraft Inerting Systems standard by SAE International, 07/10/2008
SAE AS18276A Lighting, Aircraft Interior, Installation of standard by SAE International, 07/15/2008
SAE AS 5969B Fitting Assembly, Union, Axially Swaged, Hydraulic, 5080 PSI standard by SAE International, 07/08/2008
SAE AS33515C Fitting End, Standard Dimensions for Bulkhead Flareless Tube Connections standard by SAE International, 07/08/2008