SAE AIR4365A 400 Hz Connection Aircraft Electrical Maintenance Procedures standard by SAE International, 03/28/2008
SAE AMS4235B Aluminum Alloy Castings, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71), Solution and Precipitation Heat Treated standard by SAE International, 03/27/2008
SAE AMS5704J Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.05Zr 0.006B, Consumable Electrode or Vacuum Induction Melted, 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treated standard by SAE International, 03/27/2008
SAE AMS5708K Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al Consumable Electrode or Vacuum Induction Melted 1975°F (1079°C) Solution Heat Treated standard by SAE International, 03/27/2008
SAE AMS5864C Steel, Corrosion-Resistant, Plate, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable standard by SAE International, 03/27/2008
SAE AMS5696D Steel, Corrosion and Heat-Resistant, Welding Wire, 19Cr - 12.5Ni - 2.5Mo, High Ferrite Grade (Noncurrent: Mar 2008) standard by SAE International, 03/26/2008
SAE ARP5577 Aircraft Lightning Direct Effects Certification standard by SAE International, 03/26/2008
SAE AMS5779E Alloy Welding Electrodes, Covered, Corrosion and Heat-Resistant, 75Ni - 15Cr - 1.5 (Cb+Ta) - 1.9Ti - 0.55Al - 5.5Fe standard by SAE International, 03/26/2008
SAE AMST21014A Tungsten Base Metal, High Density standard by SAE International, 03/26/2008
SAE AIR5464 Metal Clad Fibers for Electrical Shielding & Harness Overbraid standard by SAE International, 03/25/2008
SAE AS81820C Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation standard by SAE International, 03/25/2008
SAE AMS3276E Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) standard by SAE International, 03/17/2008