SAE AMS5040M Steel, Sheet and Strip, 0.15 Carbon, Maximum Deep Forming Grade standard by SAE International, 05/18/2006
SAE AS151401A Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .4375-14 UNS X .3750-24 UNF-3A standard by SAE International, 05/18/2006
SAE AMS5010K Steel Bars Free-Machining Cold Drawn (SAE 1212 or SAE 1215) standard by SAE International, 05/17/2006
SAE AMS5034A Steel, Welding Wire, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) standard by SAE International, 05/17/2006
SAE AMS6373G Steel, Welded Tubing, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) standard by SAE International, 05/17/2006
SAE AMS6375C Steel, Welding Wire, 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620), Vacuum Melted, Environment Controlled Packaging standard by SAE International, 05/17/2006
SAE AMS5580K Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe, Annealed standard by SAE International, 05/17/2006
SAE AMS5866D Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper standard by SAE International, 05/17/2006
SAE AMS4187C Bars and Rods, Rolled, Drawn, or Cold Finished, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, Annealed standard by SAE International, 05/17/2006
SAE ARP4895A Flight Control Actuators - Dynamic Seals, Collection of Duty Cycle Data standard by SAE International, 05/17/2006
SAE AMS7903B Beryllium Bars, Rods, Tubing, and Shapes, 4.25Be0 - 94Be, High Micro-Yield Strength standard by SAE International, 05/17/2006
SAE AMS5739E Steel, Corrosion and Moderate Heat Resistant, Bars, Forgings, and Rings, 14.5Cr - 6.5Ni - 0.72Ti, Solution Heat Treated and Maraged, 180,000 psi (1240 MPa) Tensile Strength standard by SAE International, 05/15/2006