SAE J 1698-1 Vehicle Event Data Interface~Output Data Definition standard by SAE International, 03/07/2005
SAE AMS4318A Aluminum Alloy, Rolled or Cold Finished Bars and Rods, 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated, Cold Worked, and Artificially Aged standard by SAE International, 02/11/2005
SAE AMS4231G Castings, Sand, 4.5Cu - 1.1Si, Solution and Precipitation Heat Treated standard by SAE International, 02/11/2005
SAE AMS4240G Castings, Sand, 10Mg, Solution Heat Treated and Naturally Aged standard by SAE International, 02/11/2005
SAE ARP4171A Safety Considerations of Food and Beverage Service Carts standard by SAE International, 02/10/2005
SAE J1884_200502 Vehicle Jack Requirements and Test Procedure standard by SAE International, 02/04/2005
SAE J1698_200502 Vehicle Event Data Interface-Vehicular Output Data Definition standard by SAE International, 02/04/2005
SAE J328_200502 Wheels--Passenger Car and Light Truck Performance Requirements and Test Procedures standard by SAE International, 02/02/2005
SAE AS81934A Bearings, Sleeve, Plain and Flanged, Self-Lubricating standard by SAE International, 02/02/2005
SAE AS8049B Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft standard by SAE International, 01/25/2005
SAE AMS5391F Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 73ni 13cr 4.5mo 2.3cb 0.75ti 6.0al 0.010b 0.10zr Vacuum Cast, As-Cast standard by SAE International, 01/24/2005
SAE AMS5396D Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 65ni 28mo 5.5fe 0.4v (N-12mv) As-Cast standard by SAE International, 01/24/2005