SAE AS524A Flange Accessory 6.500 Pilot Diameter - QAD (Noncurrent: Oct 2001) standard by SAE International, 10/01/2001
SAE AMS2815X Identification Welding Wire, Line Code System standard by SAE International, 10/01/2001
SAE AMS4632E Aluminum Bronze Bars and Rods 90cu 8.5al, Hard standard by SAE International, 10/01/2001
SAE AMS5310G Iron Castings, Pearlitic Malleable standard by SAE International, 10/01/2001
SAE AMS5781D Steel Welding Electrodes, Covered, Corrosion and Moderate Heat Resistant 15.5cr 4.5ni 2.9mo 0.10n standard by SAE International, 10/01/2001
SAE AS7253B Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 °F, Procurement Specification standard by SAE International, 10/01/2001
SAE AMS5593F Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe, Solution Heat Treated standard by SAE International, 10/31/2001
SAE AMS6378F Steel Bars, 1.0Cr - 0.20Mo - 0.045Se (0.39 - 0.48C) (4142H Modified), Die-Drawn, 130 ksi (896 MPa) Yield Strength, Free Machining standard by SAE International, 10/31/2001
SAE AMS6365J Steel Tubing, Seamless, 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135), Normalized or Stress Relieved standard by SAE International, 10/31/2001
SAE AMS3210G Chloroprene (CR) Rubber Electrical Resistant 65 - 75 standard by SAE International, 10/26/2001
SAE AMS3359B Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa·s) Viscosity standard by SAE International, 10/23/2001
SAE AS 9003 Inspection and Test Quality System standard by SAE International, 10/25/2001