Tags
Viewed products
IEC 60601-2-20 Ed. 2.1 b:2016...
IEC 60646 Ed. 2.0 b:1992...
IEC 60034-16-1 Ed. 1.0 b CORR1:1992 Corrigendum 1 - Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 1: Definitions en, Corrigenda by International Electrotechnical Commission, 04/01/1992
IEC 60748-11-1 Ed. 1.0 b:1992 Semiconductor devices - Integrated circuits - Part 11-1: Internal visual examination for semiconductor integrated circuits excluding hybrid circuits standard by International Electrotechnical Commission, 04/01/1992
IEC 60800 Ed. 2.0 b:1992 [ Withdrawn ] Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation standard by International Electrotechnical Commission, 03/31/1992
IEC 61109 Ed. 1.0 b:1992 [ Withdrawn ] Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria standard by International Electrotechnical Commission, 03/31/1992
IEC 60044-6 Ed. 1.0 b:1992 [ Withdrawn ] Instrument transformers - Part 6: Requirements for protective current transformers for transient performance standard by International Electrotechnical Commission, 03/30/1992
IEC 60603-11 Ed. 1.0 b:1992 Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors) standard by International Electrotechnical Commission, 03/15/1992
IEC 60642-3 Ed. 1.0 b:1992 Piezoelectric ceramic resonators - Part 3: Standard outlines standard by International Electrotechnical Commission, 03/15/1992
IEC 61126 Ed. 1.0 b:1992 Procedure for use in the preparation of maximum lamp outlines standard by International Electrotechnical Commission, 03/15/1992
IEC 60719 Ed. 2.0 b:1992 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V standard by International Electrotechnical Commission, 03/15/1992
IEC 60115-2-2 Ed. 1.0 b:1992 [ Withdrawn ] Fixed resistors for use in electronic equipment - Part 2: Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level F standard by International Electrotechnical Commission, 03/15/1992
IEC 60115-4-2 Ed. 1.0 b:1992 [ Withdrawn ] Fixed resistors for use in electronic equipment - Part 4: Blank detail specification: Fixed power resistors. Assessment level F standard by International Electrotechnical Commission, 03/15/1992
IEC 61094-2 Ed. 1.0 b:1992 [ Withdrawn ] Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique standard by International Electrotechnical Commission, 03/15/1992